Sider GATES
LADLE SLIDING
GATES
Our ladle gate systems guarantee
best performances
The major roles of Ladle Gate Systems and Ladle Gate Refractories are to adjust the steel flow from ladle to tundish and to minimize the risk of steel re-oxidation. These roles must be achieved at a minimum overall cost for the producer avoiding damage from corrosion, erosion and thermal shocks.
ADVANTAGES
The FT-200 series of ladle slide gates offer a state-ofthe- art technology engineered to suit all steel plants requirements in terms of:
- Lower refractory costs per ton of steel
- Automatic pressurizing system
- Optimized configuration of face pressure
- Redundant 12 gas spring pressurizing system
- Possibility to check the tension even during operation
- Optimized number of components
- Suitable for both horizontal and vertical applications
- Totally customizable opening side
- Assisted closing door system
DESIGN
The FT-200 is a easy-maintenance 2-plates linear ladle gate concept designed for bore sizes up to Ø100mm. The 12 gas spring pressure system and the assisted closing door technology allows to maintain and check the correct pressure of the refractory components and tensioning elements during the casting.
The optimized design and number of components allows for reliable operation and long service life.
The FT-200 reliable, secure, fast and ease refractory replacement is accomplished thanks to the support of the hydraulic maintenance unit.
CUSTOMIZABLE REFRACTORY
The mechanical design allows to accomodate several refractory refractory shapes and models.
ADVANTAGES
The FT-160 series of ladle slide gates offer compact solution to suit all steel plants requirements in terms of:
- Lower refractory costs per ton of steel
- Automatic pressurizing system
- Optimized configuration of face pressure
- Redundant 12 gas spring pressurizing system
- Possibility to check the tension even during operation
- Optimized number of components
- Suitable for both horizontal and vertical applications
- Totally customizable opening side
- Assisted closing door system
DESIGN
The FT-160 series is a friendly-maintenance 2-plates linear ladle gate concept, designed for bore sizes up to Ø60mm. The 12 gas-spring pressure system and the assisted closing door technology allows to maintain and check the correct pressure of the refractory components and tensioning elements during service.
The optimized design and reduced number of components allows for reliable operation and longer service life.
The FT-160 reliable, secure, fast and ease refractory replacement is accomplished thanks to the support of the hydraulic maintenance unit.
CUSTOMIZABLE REFRACTORY
The mechanical design allows to accomodate several refractory refractory shapes and models, with the possibility of pre assembled nozzles.
ADVANTAGES
The FTK160.3 series is a compact 3-plates linearof ladle gates solution for protected casting suit all steel plants requirements in terms of:
- Lower refractory costs per ton of steel
- Automatic pressurizing system
- Optimized configuration of face pressure
- Redundant spring pressurizing system
- Possibility to check the tension even during operation
- Optimized number of components
- Suitable for both horizontal and vertical applications
- Totally customizable opening side
- Assisted closing door system
DESIGN
The FTK160.3 is a easy-maintenance ladle gate concept designed for bore sizes up to Ø60mm. The 10 gas-spring pressure system and the assisted closing door technology allows to maintain and check the correct pressure of the refractory components and tensioning elements during the casting.
The optimized design and number of components allows for reliable operation and longer service life.
The FTK160.3 reliable, secure, fast and ease refractory replacement is accomplished thanks to the support of the hydraulic maintenance unit.
CUSTOMIZABLE REFRACTORY
The mechanical design allows to accomodate several refractory refractory shapes and models, with the possibility of pre assembled nozzles.
ADVANTAGES
The GM-ST 2 series of ladle slide gates offer a state-ofthe- art technology engineered to suit all steel plants requirements in terms of:
- Reliability and operational safety
- Lower refractory costs per ton of steel
- Automatic pressurizing system
- Self opening door technology
- Optimized configuration of face pressure
- Quick assembly and low maintenance
- Horizontal and vertical applications
- Easy access to ladle bottom (double hinge)
DESIGN
The GM-ST 2 is a compact and innovative ladle gate concept designed for bore sizes up to 100mm. The new technology of self opening door allows trouble free access to the refractory components and tensioning elements. The unique assembly principle, as well as the built-in safety features, allows reliable operation and extended mechanical lifetime. The GM-ST 2 has been designed for “no tool” operation to enhance security and reliability as well as optimizing the time for changing of the refractory components.
QUICK FIT-IN PLATES
The octagonal shaped plates, designed by finite elements and engineered to allow optimal stress distribution, are hold with a set of magnets and do not need any further clamping devices.
FACE PRESSURE
The unique and concentric configuration of the heat resistant tension elements guarantee optimal face pressure distribution and highest refractory performance.
FOR ANY LADLE TYPE
Vertical or horizontal installation with manual opening or automatic opening with the hydraulic cylinder.
CONNECT WITH US FOR SUPPORT OR ANY QUESTION!
CONTACT FORM
+39 030 7002350
SUPPORT
for our Customers